Table of Contents
Advertisement
15. THE INTIAL SETTINGS MENU
Using the Initial Settings menu
The Initial Settings menu gives you complete control in setting up your Universal Player, including audio, and video output settings,
audience limitation settings among others.
If a menu option is grayed out it means that it cannot be changed at the current time. This is usually because a disc is playing. Stop the
disc then change the setting.
1 - Press HOME MENU and select 'Initial Settings' from the on-screen display.
2 - Select the setup category from the list on the left then select an item from the menu list to the right.
3 - Make the setting you want.
Digital Audio Out settings
Digital Out
• Default setting: On
You only need to make this setting if you connected this system to a processor using one of the digital outputs.
If at any time you need to switch off the digital audio output, set this to Off, otherwise leave it On.
Notes : You can't switch on/off the optical and coaxial outputs individually.
- There is no digital output when playing SACDs and some DVD-Audio discs regardless of this setting.
Dolby Digital Out
• Default setting: Dolby Digital
You only need to make this setting if you connected this system to a processor using one of the digital outputs.
If your processor is Dolby Digital compatible, set to Dolby Digital, otherwise set to Dolby Digital > PCM.
DTS Out
• Default setting: DTS
You only need to make this setting if you connected this system to a processor using one of the digital outputs.
33
Advertisement
Table of Contents
