Goldmund EIDOS 36 User Manual page 15

If you selected Connected in step 6, then answer the following questions about the speakers in your system, otherwise jump to
step 11.
9 - Do you have a center speaker connected to your AV Receiver / Processor?
Select Connected or Not Connected.
10 - Do you have surround speakers connected to your AV receiver / Processor?
Select Connected or Not Connected.
11 - Do you have a sub-woofer connected to your AV receiver / Processor?
Select Connected or Not Connected.
Note : If you selected Not Connected in step 7, that completes the setup. Press ENTER to leave the Setup Navigator.
Questions 11 through 14 are concerned with the digital decoding capabilities of your AV receiver or Multi-channel processor.
12 - Is your AV receiver / Processor Dolby Digital compatible?
Select Compatible, Not Compatible or Don't Know.
13 - Is your AV receiver / Processor DTS compatible?
Select Compatible, Not Compatible or Don't Know.
14 - Is your AV receiver / Processor compatible with 96kHz Linear PCM audio?
Select Compatible, Not Compatible or Don't Know.
15 - Is your AV receiver / Processor MPEG compatible?
Select Compatible, Not Compatible or Don't Know.
16 - Press ENTER to complete the setup, or press SETUP to quit the Setup Navigator without making any changes.
Congratulations, setup is complete!
15