Qlogic SANbox 5600 Series User Manual page 125

A
LongFrameCount
Loop Timeouts
Loss Of Sync
Primitive Sequence
Errors
Rx Link Resets
Rx Offline Sequences
ShortFrameCount
Total Errors
Total Link Resets
Total LIPs Received
Total LIPs Transmitted
Tx Offline Sequences
Total Rx Frames
Total Rx Words
Total Tx Frames
Total Tx Words
Tx Link Resets
TotalTXErrors
TotalRXErrors
Total Offline
Sequences
59235-03 A
Table 5-2. Port Statistics Data Window Entries (Continued)
Entry
Number of incidents when one or more frames are received
that are greater than the maximum size (2136 bytes).
Number of loop timeouts.
Number of synchronization losses (>100 ms) detected by this
port. A loss of synchronization is detected by receipt of an
invalid transmission word.
Number of bad primitives received by the port.
Number of link reset primitives received from an attached
device.
Number of offline sequence primitives received by the port.
Number of incidents when one or more frames are received
that are less than the minimum size (24 bytes).
Total number of primitive and non-primitive port link errors.
Number of link-reset primitives transmitted and received by the
port.
Number of loop initialization primitive frames received.
Number of loop initialization primitive frames transmitted.
Number of offline primitives transmitted by the port.
Total number of frames received by the port.
Total number of words received by the port.
Total number of frames transmitted by the port.
Total number of words transmitted by the port.
Number of link reset primitives sent from this port to an
attached port.
Total number of errors transmitted by the port.
Total number of errors received by the port.
Total number of offline sequences transmitted and received by
the port.
5 – Managing Ports
Port Statistics Data Window
Description
5-9