Activate Pattern Function; Border Setup; Activate Border Function; Flip - Q-See QC40198 User Manual

AUXILIARY MENU

6.3.6 Activate Pattern Function

In Figure 6-6 input mode value in the No. blank, and click pattern button.
X419H419H419H X

6.3.7 Border Setup

In Figure 6-5 , click border button. The interface is shown in
X420H420H420H X
Please go to Figure 6-2
X422H 422H 422H
click left limit button
Repeat the above procedureto set right limit.

6.3.8 Activate Border Function

In Figure 6-6 , click auto scan button, the system begins auto scan. Correspondingly, the auto scan button changes
X424H424H424H X
to stop button.
Click stop button to terminate scan operation.

6.3.9 Flip

In Figure 6-6 , click page switch button, you will see the interface shown below. See
X425H425H425H X
set auxiliary function.
Click page switch button again, system goes back to
, use direction arrows to select camera left limit, and then please go to
X
QC40198/QC40196 User Manual
Figure 6-9
Figure 6-10 .
X421H 421H 421H X
Figure 6-10
Figure 6-2 .
X427H427H427H X
Figure 6-11
X
Figure 6-10
X423H 423H423H X
Figure 6-11 . Here you can
X426H 426H 426H X
and