System Function; Time Set; Password - Q-See QSD9004 User Manual

Picture 5-39

5.2.7 System Function

Picture 5-40

5.2.7.1 Time Set

Picture 5-41

5.2.7.2 Password

Picture 5-42
Picture 5-43
MD AREA: This option allows you select the area you want to be
sensitive to motion. The channel is separated into a 13*10 area. When
any object moves into the motion detection area, and the area where
the object is located is displayed in red recording will be triggered. In
the semi-transparent area the motion detection is off.
The [System] Menu includes the below sub-menus: Time
Set, User Password, Audio/Video Setting, Language select,
System Info and System Maintenance.
After entering into the [System], you can configure the
system to meet your needs.
.
Click the [Main menu System Date/Time] in turn to enter
into [Time Set] menu. You could not only modify system date,
time and format, but also set daylight saving time and mode.
This option allows you set the device ID for the DVR and set
the system password if you want to use one. The new passwords
will be available after clicking [APPLY] button.
.
When you set Password Enabled to "ON" (shown as Picture
5-43), you can setup a user password and administrator password
respectively. The password supports up to 6 characters.
24
User Manual