Model Hank Jr.
1200W Commercial Canister Vacuum
This vacuum cleaner is a high quality, precision made
product. All parts used in the manufacturing of this
vacuum cleaner have passed rigid quality control
standards prior to assembly and an "each unit" ﬁ nal
inspection prior to packaging is your assurance of
proper assembly. This vacuum cleaner was protectively
packaged to prevent possible damage in transit. Should
damage occur, please notify the transporting carrier
immediately for loss and\or claim.
TO CONNECT THE HOSE
Screw hose onto the hose connector at the front of
The extension wands, handle and tools all push
together with a ﬁ rm twisting motion. Tools can also
be used with the tool adaptor to attach them directly
to the end of the hose.
AIR SLIDE CONTROL
You can reduce and adjust the suction for delicate
fabrics by moving the air slide to open on the hand
grip. For maximum suction the air slide control should
be closed at all times.
Always pull out the cable in full before using the
machine. To rewind the cable turn the rewind knob
in a clockwise direction. Avoid kinking of the cable
during rewinding. Do not use excessive force when
winding or unwinding the cable.
The top of the machine can be removed by sliding out
the two side locks. This gives access to the ﬁ lter and
Operation & Care Instructions
Save For Future Reference
ABOUT THE MACHINE
Coil cord in a large loop and insert under handle for
storage. Grasp the plug when unplugging from wall.
Do not pull the cord.
Check ﬁ lter regularly and brush clean when necessary.
Do not use the machine without dust bag and
ﬁ lter in place as damage to your cleaner motor
unit will occur.
This vacuum should be used for dry pick-up
only. DO NOT use to pick up water or other
Never lubricate the vacuum cleaner motor. The
motor bearings are permanently sealed. This
vacuum is intended for indoor use only and it is
not intended to be exposed to rain.