Table of Contents
Advertisement
AUDIO MENU
TREBLE
BALANCE
AUDIO
RUOIO J SEQ
SURROUND
BASS
TREBLE
BALANCE
AUDIO
(AUDIO
mode options
are not available
while
using a VIDEO or
S-VIDEO
source. The
audio received
from
these sources are
assumed
to be stereo .)
SEQ
(Spatial Equalization)
SURROUND
Adjusts the BASS (low-frequency)level.
Adjusts the TREBLE (high-frequency) level.
Adjusts the balance of sound between the left and right speakers for stereo program,;.
Allows you to select STEREO, MONO or 2ND AUDIO/SAP speaker operation.
STEREO:
Directs the sound to the left and right speakers as supplied by the program
source (broadcast TV, VCR, etc.)
MONO:
Directs the same sound to both left and right speakers even if the source being
received is in stereo.
2ND AUDIO/SAP:
Directs the sound for the Second Audio Program to both the left and right
speakers. SAP sound is always monaural. If the SAP signal ends, the audio
defaults to either stereo or mono depending on the audio being received.
Improves
tonal balance and increases
apparent
stereo separation
to produce
a spacious
and more tonal
sound. SEQ is only available
if a stereo signal is being received and STEREO
is either selected using
the AUDIO
option or selected by default.
Adjusts the level of Surround
Sound provided
to the optional
surrou:ld
sound speakers.
Surround
Sound is only available
if a surround
encoded
stereo signal is being received
and SIEREO
is either
selected using the AUDIO
option or selected by default.
To Access AUDIO
MENU
Refer to the "Quick
Reference
to On-Screen
Menus"
section
for details.
NOTE:
All adjustments
on the AUDIO MENU
are optional.
You do Oot have to use these features
in order to use your TV.
CH13
10:56
STEREO
STEREO
is selected and a
stereo signal is being
received.
You will hear
stereo sound.
J
Audio Mode Shown
in Channel/Time
Display
To Adjust
BASS, TREBLE,
BALANCE
and SURROUND
Press ADJUST
(ADJ) LefVRight
until the most pleasing
sound is heard.
To Use AUDIO
Mode Options
Press ADJUST
(ADJ) Left/Right
to select desired option.
We recommend
that you use the STEREO
option.
The TV
will switch automatically
Izetween the STEREO
and MONO
modes dependent
on the signal being received.
If you prefer SAP, use the 2ND AUDIO/SAP
option.
On those
stations which broadcasl
two audio portions,
you will hear the
SAP (usually a second lawuage).
When the SAP broadcast
ends, the TV switches
auto matically
between
STEREO
and
MONO
modes. The TV switches
back to 2ND AUDIO/SAP
when the SAP broadcasl: resumes.
2736-0
9 _
1
Advertisement
Table of Contents
