Step 2. Make Vcr Connections To Tv - Zenith SENTRY 2 SLS1917 Operating Manual & Warranty

CONNECTIONS FOR YOUR TV
STEP 2. MAKE VCR CONNECTIONS TO TV (SELECT MODELS)
MONAURAL VCR
Connections:
1. Connect VCR AUDIO OUT to the AUD IN (Audio
Input) jack on TV.
2. Connect VCR VIDEO OUTPUT into the VID IN
(Video Input) jack on TV.
Operation: To use these VCR connections, you must watch
the AUX channel on the TV. To select the AUX channel,
press CH (CHANNEL) Up/Down until you select the next
channel after the highest/lowest channel (or you may enter the
number 999 from the remote control.) For improved piaure
quality,place VCR/I'V switch on the VCR in the VCR position.
BASE
BAND
VIDEO
MONAURAL VCR
OUTPUTS
I v_o _wo I
OUT
AUDIO
TV ANT
@
VID IN AUD IN
"0 0
Connection Center on Back of TV
STEREO VCR
Connections: Use the following connections to obtain
monaural sound from your TV while playing a stereo video
lape.
1. Connect VCR RIGHT/LEFT AUDIO OUTPUT
using the "Y" adaptor (customer supplied), into the
AUD IN (Audio Input) jack on TV.
2. Connect VCR VIDEO OUTPUT into the VID IN
(Video Input) jack on TV.
Operation: To use these VCR connections, you must watch (_
the AUX channel on the TV. To select the AUX channel,
press CH (CHANNEL) Up/Down until you select the next
channel after the highest/lowest channel (or you may enter the
number 999 from the remote control.) For improved picture
quality, place VCR/TV switch on the VCR in the VCR position.
STEREO VCR
I._D_O OUTPUTS
LEFT STEREO AUDIO
RIGHT STEREO AUDIO
BASE
BAND
VIDEO
TV ANT
@
VID IN AUD IN
O
Connection Center on Back of TV
Ad a pro r
'-£30 1 -- 4