Basic Menu Operations - Zenith SENTRY 2 SLS1917 Operating Manual & Warranty

ON-SCREEN MENUS
BASIC MENU OPERATIONS
Vertical Control Panel Shown
(Menu buttons are provided
on some remote controls.)
3. To Access an Option/Feature for Adjustment
Press ADJUST (ADJ) Left/Right to access the
selected option/feature to see its submenu or status
display. Follow the instructions shown in the dis-
play. In most cases, you simply press ADJUST
(ADJ) Left/Right a second time to adjust the ac-
cessed option/feature. You still see the status of the
item change in the display.
NOTE: Do not change channels during menu
operations unless instructed to do so in the proce-
dures given in this operating guide.
CLOCK SET
PRESS NUMBERS
OR ADJUST KEYS
l. To See a Menu or Change Menus
Press MENU repeatedly until the desired menu is
shown. Example shows choosing the SETUP Menu.
f
-- > AUTO CH. SEARCH
CH. ADD/DEL
TUNING BAND
AUTO FINE TUNE
CLOCK SET
CAPTIONS
,.. j
Choosing Setup Menu
2. To Select an Option/Feature on a Menu
Press SELECT (SEL) repeatedly until the desired
option/feature is highlighted. Example shows
selecting CLOCK SET.
AUTO CH. SEARCH
CH. ADD/DEL
TUNING BAND
AUTO FINE TUNE
- > CLOCK SET
CAPTIONS
Selecting Clock Set
J
Clock Set Display
4. To Access a Different Main Menu
Press MENU repeatedly until the desired menu is
shown.
5. To Return to Normal Viewing
Press ENTER (ENT) or wait a few seconds and the
TV will return automatically to normal operation.
Service Menus: In addition to the menus shown above,
there are menus for factory and field servicing. Service
menus are not intended for use by the owner.
If you inadvertently access a service menu, press ENTER
(ENT) to return immediately to normal TV viewing.
:_J_.A 8 -- 2