Table of Contents
Advertisement
SOURCE
MENU
SOURCE MENU
ANT/CABLE1
ANT/CABLE2
VIDEO 1
VIDEO 2
S.,VIDEO 1
SOURCE MEIqU
ANT/CABLE1
ANT/CABLE2
VIDEO 1
VIDEO 2
S-VIDEO 1
VIDEO 3
S-VIDEO 2
Source
Menu
Source Menu for "INs with Auxiliary ,Jacks
TO SELECT
A SOURCE
Purpose
The SOURCE
MENU is used to specify the equipment
that is being used to supply the video and audio signals.
You select the source you want by selecting the SOURCE
MENU. It shows the possible sources available for your
viewing selection.
To Access the SOURCE ]MENU
Directly
1, Press SOURCE
on the remote control to bring up the
SOURCE
MENU.
2. Press SOURCE
repeatedly until the source you want is
highlighted.
3. Press ENTER to retu:rn to normal viewing.
I'o Access the SOURCE MENU Indirectly
1. Press MENU until the SOURCE
Menu is displayed.
2. Press SELECT Up/Down until the desired source is
highlighted.
3. Press ENTER to return to normal viewing.
Source Identification
The Channel/Time display is used to determine the type of
input source currently being viewed. To see the Channel!
Time display, press ENTER. If an antenna or cable-TV
_,x)urceis being viewed, the Channel/Time display is shown in
the Channel Number/Time format. If a Video source is being
_fiewed, the Channel!Time display is shown in the Video/Time
format.
]NOTE: The sources arc: identified by color in both the on-
screen displays and on the connection
center on the back of
the TV. The color for the Channel/Time
display, Volume
and Muted display will match the color or the source you
are watching. The color will also help to identify which
source you are watching when viewing PIP. The colors are
as follows:
SOURCE
COLOR
ANT/CABLE
1 ........................
RED
ANT/CABLE
2 ........................
BLUE
VIDEO 1 .............................
MAGENTA
VIDEO 2 .............................
LT. BLUE
S-VIDEO
1 ...........................
GREEN
VIDEO 3 ............................
YELLOW
S-VIDEO
2 ...........................
WHITE,
Source Equipment
Connections
The actual source selected for viewing on your TV depends
on how the TV is connected to external equipment.
Selecting ANT/CABLE 1 or 2 from SOURCE Menu:
Routes the ANTENNA or cable-TV source to the TV for
viewing. You see program materi_d from whichever signal
source is connected
to the ANT/CABLE
jack. Usually the
antenna is connected to the ANTENNA
jack. In cable ap-
plications, the output from a cable-TV decoder i,; con-
nected to this jack. For VCR application, the Ab,_ OUT
from the VCR is connected
to this jack.
Selecting VIDEO 1 or 2 from SOURCE Menu:: Routes the
auxiliary video source (such as a VCR or a Video Disc
player) to the TV for viewing. The video source must be
connected to the corresponding
VIDEO 1/2 jacks.
Selecting S-VIDEO 1: Routes the auxiliary Super-VHS
VCR Source to the TV for viewing. The Super-VHS
VCR
must be connected to the corresponding
input jacks.
Selecting VIDEO 3 from SOURCE Menu: Routes the
auxiliary video source (such as a camcorder,
VCR or a
Video Disc player) to the TV for viewing. The video source
must be connected to the corresponding VIDEO 3 jacks.
Selecting S-VIDEO 2: Routes the auxiliary Super-VHS
VCR source to the TV for viewirg. The Super-vi-IS VCR
must be connected to the corresponding
S-VIDEO 2jacks.
z651_
8 - 1
Advertisement
Table of Contents
