Clockset; Captions; Ch. Background; Projo Setup - Zenith PV5268RK Operating Manual And Warranty

Projection color tv mts stereo picture-in-picture closed captions universal remote control
Table of Contents

Advertisement

SETUP MENU
CLOCK
SET
Purpose
Sets the clock in the TV to the correct
time. After the time
is set, the current
time will appear
on the Channel!Time
dis-
play whenever
the TV is turned on, the channel
is changed,
or ENTER
is pressed.
Power Failure Note:
The time will have to be reset if power
to the TV is interrupted.
SI-TUP MENU
AUTO CH. SEARCH
CH. ADD/DEL
CH. LABELS
TUNING BAND
AUTO FINE TUNE
CLOCK SET
CAPTIONS
CH. BACKGROUND
PROJO SETUP
10:30
Selecting Clock Set
To Use CLOCK SET from Remote Control
1.
CLOCK
SET should be selected
if you followed
the
"Basic
Menu Operation"
given in the "On-Screen
Menu"
section.
2.
Use the numbered
buttons
on the remote
control to
enter
the current
time. Press ENTER
to start the
clock.
For example,
to set the clock to 10:30, press
1, then
0, then 3, then 0; and then
press
ENTER.
If you
enter an invalid time, such as 14:35 or 2:8(I, the time
will disappear
and you can enter another
time.
To Use CLOCK SET from Control Panel
1.
Use SELECT
Up/Down
to highlight
CLOCK
SET
in the SETUP
MENU.
2.
Use ADJ Left/Right
to set the time, and then press
ENTER
to start the clock.
CAPTIONS
F_urpose
Displays closed captions (CC) or informational text when
available on the selected channel.
1'o Access CAPTIONS Indirectly
1.
CAPTIONS
should be selected
if you followed
the
"Basic
Menu Operation"
given in the "On-Screen
Menu"
section.
2.
One
of five different
selections
is shown:
OFF,
CAPTION
1, CAPTION
2, TEXT
1, and TEXT 2.
3;. Press ADJUST
(ADJ)
Left/Right
to select
desired
mode of operation.
4.
The display
disappears
from
the screen
automat-
ically in about 10 seconds,
or you may press ENTER
(ENT)
to remove
the display
immediately.
SETUP MENU
AUTOCH. SEARCH
CH.ADD/DEL
CH. LABELS
TUNINGBAND
AUTOFINETUNE
CLOCKSET
_- CAPTIONS
CH. BACKGROUND
PROJO SETUP
Selecting Captions
CAPTION 1
To Access CAPTIONS Directly
1.
Press
CC-QUIT
on the remote
control
to select
CAPTIONS.
One of the five different
selections
is
shown: OFF, CAPTION
1. CAPTION
2, TEXT 1,
and TEXT
2.
2.
Press
ADJUST
(ADJ)
Left/Right
to select
the
desired
status.
3.
The display
disappears
from the screen
automat-
ically in about 10 seconds,
or you may press ENTER
(ENT)
to remove the display
immediately.
Application
Your new TV is able to decode and display tlhe Closed cap-
tions and informational
text that are broadcast
with some
TV shows. Captions can be subtitles for the hearing im-
paired, or translations
into another language. Informational
text can be the daily program schedule for the TV station,
or special announcements.
Look for a (CC) or similar sign in your TV schedule, or on
the video tape: cassette, which indicates that captions are
provided.
The closed caption signal is recorded by all VCRs when
recording a TV broadcast
or copying a tape having closed
captions.
(continued on next page)
_so_o
9 - 4

Advertisement

Table of Contents
loading

Table of Contents