Table of Contents
Advertisement
MAINTENANCE
AND TROUBLESHOOTING
VCR
MODE
CHART
1. OUTPUT
TO TV FROM
ANTENNA
OUT
JACK
ON VCR
ANTENNA
OR CABLE-TV
INPUT TO VCR
VCR POWER
IS OFF
ALL
ANTENNA
OR CABLE-TV
CHANNELS
TO TV
STEREO
AUDIO
IF TVIS
CAPABLE
START)
HERE
The operating mode of your VCR determines what type of
a program source is provided, and whethez the. audio is
stereo or monaural. Use t_; flow chart to determine the
operating status of your VCR, so that you ,ran :select the
proper viewing source and channel on your TV. Select the
VCR output channel (3 o:r 4) on your TV to view tapes or to
see programs selected by using the channel tinier in the
VCR.
During tape playback, we recommend
you use the AUDIO
and VIDE()
output jacks on your VCR fo:: improved per-
formance.
VCR POWER
IS ON
_/vU
S
CR
SWITCH IN TV
POSITION
SWITCH IN VCR
POSITION
ALL
ANTENNA
OR CABLE-TV
CHANNELS
TO "IV
STEREO
AUDIO
IF TVIS
CAPABLE
NO
VCR TUNER
SELECTS
CHANNELS
TO
BE SEEN ON TV
CHAN 3/4
PLAYED?
TViVCR awitch may be
marke,:l W/VIDEO
on some VCRs.
YES
VIDEOTAPE
PROVIDES
PROGraM
TO
BE SEEN ON TV
CHANt3_
MONAURAL
AUDIO
ONLY
IMONAURAL
AUDIO
ONLY
VCR ANTENNA
OUTPUT TO "iV
VCRUOD_
13 - 3
Advertisement
Table of Contents
