Special Features - Zenith SENTRY 2 Z25A12 Operating Manual & Warranty

I
GET TO KNOW YOUR REMOTE (MBR344 7)
SPECIAL FEATURES
AUX+I, AUX+2, AUX+3
Your remote can control up to seven products.
If you've programmed the remote for four
p:roducts using the TV, VCR, CABLE, and
AUX keys, you can program it for up to three
more by using AUX+I, +2, +3.
To Program AUX÷t; AUX+2, and AUX+3
Locate the three-digit code for your
product in the code table.
',2. Press and hold PRG until the indicator
lights.
3. Press AUX and "1'" simultaneously
to select AUX+I.
4. Enter the three-digit code, then press
ENTER. The indicator light should flask
then turn offto indicale the code was
accepted. If the light stays on, repeat
steps 3 and 4 or try a different code.
:5. Repeat steps 2 - 4 for AUX+2 and
AUX+3.
6 Write your codes on the label inside
the battery compartment for future
reference.
Hold down AUX and press 1, 2, or 3 to
._tccessAUX +1, +2, or +3 mode.
('ABLE BOX VOLUME
Your remote can control cable box volume and
nmting, if available on your cable box.
To Programthe CableBox Volume
1.
Program your cable box code into the
CABLE or the AUX key.
2. Repeat the programming steps, using
the same CABLE or AUX key as
above, but enter special code 3-9-9,
followed by ENTER..
AMPLIFIER VOLUME OVERRIDE
Your remote can override your TV, VCR, or
video disc player's volume functions with your
amplifier'svolume and muting.
To Programthe AmplifierVolumeOverride
1.
Programyour amplifier code into the
CABLE or AUX key.
2. Select the key on your remote (TV,
VCR, etc.) where you
want the amplifier volume control
function to appear. For example, press
TV if you want to operate your
amplifier's volume and mute while the
remote is in TV mode.
:3. Enter special code 4-9-9, followed by
ENTER.
Fhe amplifier volume and mute
features are now available in the TV
mode.
Notes:
O To restore normal volume and muting
control to your remote, reprogram the re-
mote for the product into each key (TV,
VCR, etc.) to be restored.
[] CD and tape players will automatically
select amplifier volume and mute, if an
amplifier code is programmed into the
remote.
Note: To restore TV volume/mute control to
the CABLE or AUX key, reprogram your ca-
ble code into that key.
3199-O
6m7