Cycles - Whirlpool Duet GGW9250SU0 Use & Care Manual

Use Manual Cycles to select a specific amount of drying time and
a drying temperature. When a Manual Cycle is selected, the
Estimated Time Remaining display shows the actual time
remaining in your cycle. You can change the actual time in the
cycle by pressing MORE TIME or LESS TIME.
Timed Dry
Use this cycle to complete drying if items are still damp after an
Automatic Cycle. Timed Dry is also useful for drying heavyweight
and bulky items such as bedspreads and work clothes.
Lightweight garments, such as exercise wear, can be dried using
Timed Dry on a Low temperature setting.
Touch Up
Use this setting to help smooth out wrinkles from such items as
clothes packed in a suitcase or wrinkled from being left in the
dryer too long.
Quick Dry
Use this cycle for drying small loads or loads that need a short
drying time.
Manual Preset Cycle Settings
Manual Cycles Temperature Default Time
Load Type (Minutes)
TIMED DRY High 40
Heavyweight items, bulky
items, bedspreads, work
clothes
TOUCH UP Medium 20
Helps to smooth out
wrinkles
QUICK DRY High 23
Small loads
WRINKLE SHIELD
TM
Feature
When you are unable to remove a load of clothes from the dryer
as soon as it stops, wrinkles can form. The WRINKLE SHIELD
TM
feature periodically tumbles, rearranges and fluffs the load to help
keep wrinkles from forming.
• Press the WRINKLE SHIELD
TM
feature to get up to
120 minutes of heat-free, periodic tumbling at the end of a
cycle.
• Stop at any time by pressing the WRINKLE SHIELD
TM
feature
or opening the dryer door.
For the Casual Cycle, the WRINKLE SHIELD
TM
feature is
preset to "ON." The other Automatic Cycles will retain the
WRINKLE SHIELD
TM
feature setting. (For example, if you
select the WRINKLE SHIELD
TM
feature in the Normal cycle,
the WRINKLE SHIELD
TM
feature will be on the next time you
select the Normal cycle.)
NOTE: If you do not select the WRINKLE SHIELD
TM
feature, the
dryer stops after the cool down period.
Temperature
Temperature settings are used with the Manual Cycles. Press
TEMPERATURE until the desired temperature setting glows.
Temperature settings cannot be used with the Automatic Cycles.
o High
0 Medium
0 Low
0 ExtraLow
0 Air Only
Temperature
(Monud Cyc'l_s only)
Air Only
Use the Air Only setting for items that require drying without heat
such as rubber, plastic and heat-sensitive fabrics. This chart
shows examples of items that can be dried using Air Only.
i
Type of Load Time*
(Minutes)
Foam rubber - pillows, padded bras, stuffed toys 20 - 30
Plastic - Shower curtains, tablecloths 20 - 30
Rubber-backed rugs 40 - 50
Olefin, polypropylene, sheer nylon 10 - 20
*Reset time to complete drying, if needed.
When using Air Only
• Check to see that coverings are securely stitched.
• Shake and fluff pillows by hand periodically during the cycle.
• Dry item completely. Foam rubber pillows are slow to dry.
NOTE: Automatic Cycles are not available when using the Air
Only setting.
End of Cycle Signal
The End of Cycle Signal produces an audible sound when the
drying cycle is finished. Promptly removing clothes at the end of
the cycle reduces wrinkling.
0 Louder
0 Softer
o off
End Of @de Signal
Hold for 3 Seconds to
Lock / Unlock Control
Press and release the END OF CYCLE SIGNAL to adjust the
sound level or turn off the signal.
NOTE: When the WRINKLE SHIELD
TM
feature is selected and the
End of Cycle Signal is on, an audible sound will be emitted every
5 minutes until the clothes are removed, or the WRINKLE
SHIELD
TM
feature is finished.
17