FujiFilm X100S Owner's Manual page 128

Problems and Solutions
■ ■ Connections/Miscellaneous
Connections/Miscellaneous
Problem Problem
No picture or sound. No picture or sound.
The computer does not The computer does not
recognize the camera. recognize the camera.
Can not transfer RAW or Can not transfer RAW or
JPEG fi les to computer. JPEG fi les to computer.
Pictures can not be Pictures can not be
printed. printed.
Only one copy is printed/ Only one copy is printed/
the date is not printed. the date is not printed.
The camera is unrespon- The camera is unrespon-
sive. sive.
The camera does not func- The camera does not func-
tion as expected. tion as expected.
No sound. No sound.
114
• • The camera is not properly connected The camera is not properly connected: Connect the camera properly (
nected, pictures will be displayed on the TV instead of in the camera monitor. nected, pictures will be displayed on the TV instead of in the camera monitor.
• • Input on the television is set to "TV" Input on the television is set to "TV": Set input to "HDMI".
• • The volume on the TV is too low The volume on the TV is too low: Use the controls on the television to adjust the volume.
Be sure the camera and computer are correctly connected (P Be sure the camera and computer are correctly connected (
Use the bundled software to transfer pictures (P Use the bundled software to transfer pictures (
• • The camera is not properly connected The camera is not properly connected: Connect the camera correctly (
• • The printer is off The printer is off : Turn the printer on. : Turn the printer on.
The printer is not PictBridge compatible. The printer is not PictBridge compatible.
• • Temporary camera malfunction Temporary camera malfunction: Remove and reinsert the battery (
• • The battery is exhausted The battery is exhausted: Charge the battery ( : Charge the battery (P
Remove and reinsert the battery (P Remove and reinsert the battery (
Turn silent mode off ( Turn silent mode off (P P 5). 5).
Solution Solution
: Connect the camera properly (P
: Set input to "HDMI".
: Use the controls on the television to adjust the volume.
P 97). ).
P 93). ).
: Connect the camera correctly (P
: Remove and reinsert the battery (P
P 11) or insert a fully-charged spare battery (
11) or insert a fully-charged spare battery (P
P 12, 14). If the problem persists, contact your FUJIFILM dealer.
12, 14). If the problem persists, contact your FUJIFILM dealer.
P 104). Note that once the camera is con-
). Note that once the camera is con-
P 99). ).
P 12, 14).
12, 14).
P 12).
12).