Macintosh: Installing Raw File Converter - FujiFilm X100S Owner's Manual

Macintosh: Installing RAW FILE CONVERTER

Macintosh: Installing RAW FILE CONVERTER
RAW FILE CONVERTER is used to view RAW images on your computer.
1
Confi rm that the computer meets the following system requirements:
CPU CPU Intel (Core 2 Duo or better)
Pre-installed copies of Mac OS X version 10.6–10.8 (visit http://www.fujifilm.com/support/digital_cameras/
OS OS
compatibility/ for more information).
RAM RAM 1 GB or more
Free disk space A minimum of 200 MB required for installation with 400 MB available when RAW FILE CONVERTER is running Free disk space
Video Video 1024 × 768 pixels or more with 24-bit color or better
2
After starting the computer and quitting any applications that may be running, insert the installer
CD in a CD-ROM drive and double-click SILKYRFCEXInstaller.
3
Enter an administrator name and password when prompted and click OK, then follow the on-
screen instructions to install. Click Exit to quit the installer when installation is complete.
4
Remove the installer CD from the CD-ROM drive. Note that you may be unable to remove the CD
if Safari is running; if necessary, quit Safari before removing the CD. Store the installer CD in a dry
location out of direct sunlight in case you need to re-install the software.
Installation is now complete. Proceed to "Connecting the Camera" (P 97).
Viewing Pictures on a Computer
95