Step 1. Hardware Setup; Hard Drives Setup; For Raid 0 (Striping Array); For Raid 1 (Mirror Array) - Foxconn SiS964 User Manual

Step 1. Hardware Setup

Hard Drives setup

The South Bridge SiS964 SATA controller only supports two Serial ATA
hard drivers.

For RAID 0 (Striping array)

Any of 2 SATA Hard disks would make a stripe system.
The South Bridge SiS964 SATA controller only supports combination 6.
NOTE: Storage Capacity: the number of hard drives times the capacity of the
Working Speed: the speed of the lowest drive in the disk array

For RAID 1 (Mirror array)

Any of 2 SATA Hard disks would make a mirror system.
The South Bridge SiS964 SATA controller only supports combination 6.
NOTE: Storage Capacity: the capacity of the smallest drive in the disk array
Working Speed: the speed of the lowest drive in the disk array

For JBOD (Spanning array)

Any of 2 SATA Hard disks would combine to a JBOD system.
The South Bridge SiS964 SATA controller only supports combination 6.
NOTE: Storage Capacity: the number of hard drives times the capacity of the
smallest drive in the disk array
Working Speed: the speed of the lowest drive in the disk array
Serial ATA RAID User's Guide
smallest drive in the disk array
4