Table of Contents
Advertisement
that appears on screen, and then press the Enter key.
5.
Press Enter to continue with installation or if you need to specify
any additional devices to be installed, do so at this time. Once all
devices are specified, Press Enter to continue with installation.
6.
From the Windows XP/2000 Setup screen, press the Enter key.
Setup will now load all device files and then continue the
Windows XP/2000 installation.
7.
Please install the driver package again (ex. SiS RAID driver
v1.03) while the operation system has been setup.
Remark:
If you would like to install windows to any RAID sets, you should
create RAID from BIOS RAID setting Utility or SiS964 RAID Utility
first and then follow the steps above. Pleaser refer to step 3 or step
4.
Existing Windows XP/2000 Installation
1.
Install the driver by execute SiS RAID driver setup utility.
2.
The drivers will be automatically installed.
Confirming Windows XP/2000 Driver Installation
1.
From Windows XP/2000, open the Control Panel from "My
Computer" followed by the System icon.
2.
Choose the "Hardware" tab, then click the "Device Manager" tab.
3.
Click the "+" in front of "SCSI and RAID Controllers" hardware type.
The driver " SiS 180 Raid Controller " should appear.
Serial ATA RAID User's Guide
6
Advertisement
Table of Contents
