Pressure Calibrator
Safety Information
Faults and Damage
Applying a voltage greater than 30 V to the input of the
Calibrator invalidates its Ex Approval and may impair its
safe operation in an Ex-hazardous area.
If there is any reason to suspect that the safe operation of
the Calibrator has been affected, it must be immediately
withdrawn from use, and precautionary measures must be
taken to prevent any further use of the Calibrator in an Ex-
hazardous area.
Hold in
Fully observe all instructions, warnings, and cautions
fixed
contained in this manual. In case of doubt due to
position
translation and/or printing errors, refer to the original
English users manual.
wh001f.eps
Figure 1. Connection Technique
7