Whirlpool WFW8300SW02 Use & Care Manual page 5

Installation clearances
• The location must be large enough to allow the washer door
to be fully opened.
• Additional spacing should be considered for ease of
installation and servicing. The door opens more than 90 °, and
it is not reversible.
• Additional clearances might be required for wall, door, and
floor moldings.
• Additional spacing of 1" (2.5 cm) on all sides of the washer is
recommended to reduce noise transfer.
• Companion appliance spacing should also be considered.
Washer Dimensions
601/4"
(127.6cm)
36"
(91.4 crn)
. (74.3crn)
Recommended installation spacing for custom
undercounter installation
The dimensions shown are for the recommended spacing.
Custom undercounter installation - Washer only
36" rnin,
(91.4 crn)
1
t
l"---qF-
(2.3 cm) 1/(68.6 cm) ii (2.5 crn}
Recommended installation spacing for recessed or
closet installation, with or without a pedestal
The dimensions shown are for the recommended spacing.
Recessed area or closet installation
T
40"
(122crn}
M 1"_- 29'/4"-'_ 4" _"
(2,3crn) (74.3crn) (1O,2crn)
A
48 in?_
(310cm2) '
24 in.2 _
(155crn2)
E}
,_ 3"
(7.0 cm)
--f
• _-- 3"
(7.0 cm)
A. Side view - closet or confined area
B. Closet door with vents
Recessed or closet installation - Washer on pedestal
t
38"rnin.
(96,5 cm)
1" -'_ _------ 27" -_ _'- 1" --_ 1"
29V4" -_1 4" I_-
(2,5 crn) (68.6cm) (2,5crn) (2,5crn) (74.3crn) (10.2cm)
A. Recessed area
B. Side view - closet or confined area