Fantasea EyeDaptor G9 Instruction Manual

Fantasea EyeDaptor G9-G10
The EyeDaptor G9-G10 enables mounting Fantasea lens accessories that were designed for
the Canon G10 Housing (WP-DC28) on the Canon G7 and G9 Housing lens ports (WP-DC11
and WP-DC21).
Compatibility

Mounting the BigEye Wide Angle Lens G10 (Cat. No.
5135) on either the Canon G7 or G9 Housing requires
EyeDaptor G9-G10 only, as described on the
Instructions section below.

Mounting the SharpEye Macro Lens M67 (Cat. No. 5128)
on either the Canon G7 or G9 Housing requires an
additional adaptor- the EyeDaptor G10-F67 (Cat. No.
4701), as described on the Instructions section below.
Included in the Kit
1. EyeDaptor G9-G10
2. 2 screws
3. Screwdriver
Mounting the BigEye Lens G10 on the Canon G7/G9 Housing
1. Please use the utmost care and do not use excessive force when assembling and
disassembling the different lens accessories, in order not cause any damage to the
products.
2. Place the BigEye Lens G10 on a flat and protected surface, so the side that attaches
to the housing lens port is facing up.
3. Hold the EyeDaptor G9-G10 so the two adaptor wings are on the top side of the
adaptor and the concaved part of the adaptor is facing up (see image #1).
1
Instruction Manual
(Cat. No. 4703)
EyeDaptor G9-G10 Instruction Manual