Download Print this page

Fantasea EyeDaptor G Series-F67 Instruction Manual page 3

Canon g series adaptors & filters

Advertisement

f.
Gently turn the EyeDaptor G Series around, until the screw holes on the EyeDaptor G Series are
aligned with the screw holes on the 67mm Add-On Plate.
g. Insert the 6 screws included into the aligned screw holes of the EyeDaptor G Series and 67mm Add-
On Plate. Use the screwdriver included in order to tighten the screws (image #6). Tighten the screws
enough in order to keep them from falling out, but don't tighten them too strongly, as this might
cause damage to the products.
h. Once the EyeDaptor G Series-F67 is assembled, lens accessories featuring a 67mm male thread can
be mounted on the adaptor by gently screwing them into the female thread (image #7).
i.
Note that when mounting the SharpEye Macro Lens M67 on Canon G Series housings using the
EyeDaptor G Series-F67, a vignette is encountered. This vignette can be eliminated by simply
zooming in with the camera lens. Since the macro lens was designed to enable a shorter focus
distance when using the camera lens zoom, zooming in with the macro lens installed on the housing
will only enhance the macro effect and composition. Alternatively, the vignette can be left for
artistic compositions.
2.
Assembling the RedEye/PinkEye Filter G Series
a. Peel the transparent protective films off both sides of the color insert.
b. Attach the longer end of the snap cord to the
color insert. The shorter end of the snap cord can
be attached either to the housing, arm or to any
of the secure line loops featured on the
EyeDaptor G Series.
c. Hold the EyeDaptor G Series so that the flat side
of the adaptor with the two stoppers is facing
down, the adaptor configuration is facing up and
the "TOP" marking is pointed away from your
body (image #8).
d. Hold the color insert above the EyeDaptor G
Series so that the color insert is aligned with the
dedicated slot inside the EyeDaptor G Series and the secure string of the color insert is positioned on
the bottom right corner (image #9 on the following page).
e. Gently push the color insert into the dedicated slot inside the EyeDaptor G Series (image #10 on the
following page).
3
Image #6
Image #7
Canon G Series Adaptors & Filters Instruction Manual 2011016
Image #8

Advertisement

loading

This manual is also suitable for:

Redeye filter g seriesPinkeye filter g series