Advertisement
4. Compatibility
The EyeDaptor G Series-F67, RedEye Filter G Series and PinkEye Filter G Series are compatible with the
Canon G10 Housing (WP-DC28) and the Canon G11/G12 Housing (WP-DC34).
5. Instructions for Use
Important Notice
1.
Assembling the EyeDaptor G Series-F67
a. Place the EyeDaptor G Series on a flat and protected surface, so that the adaptor configuration is
facing up and the flat side of the adaptor is facing down (image #1).
b. Remove the 4 screws holding the 2 stoppers by using the screwdriver included (image #2).
c. Turn the EyeDaptor G Series upside down and remove the 2 stoppers off the adaptor (image #3).
Image #1
d. Place the 67mm Add-On Plate on a flat and protected surface, so that the thread is facing down and
the concaved side of the plate is facing up (image #4).
e. Place the EyeDaptor G Series over the 67mm Add-On Plate so that the adaptor configuration is
facing up and the flat side of the adaptor is facing the 67mm Add-On Plate (image #5).
2
Please use the utmost care and do not use excessive force when assembling and
disassembling the different accessories, in order to not cause any damage to the
product.
Image #4
Image #2
Image #5
Canon G Series Adaptors & Filters Instruction Manual 2011016
Image #3
Advertisement
