Installing A New Bag - Whirlpool GX900QPPQ0 Use & Care Manual

Style 2
To start and stop the compactor
1. To start the compactor:
• Turn the Key-Switch to ON.
• Press ON.
• Press START. The compactor will automatically stop at
the end of the cycle.
4. Lift out bag.
2. To stop the compactor during a cycle:
• Press OFR
• Press ON. The compacting ram will rise. When the ram
stops rising, you can open the drawer.
To remove the Key-Switch
1. Turn the Key-Switch to the OFF/LOCK position.
2. Remove and store key out of children's reach.
When the trash is compacted to the top of the drawer, remove
the bag. If the bag is too heavy, compact less trash before
emptying it in the future.
IMPORTANT: Do not push items down into compactor with
hands or feet.
1. Pull the drawer completely open.
2. Remove top of bag from bag retainer buttons. Pull up all four
bag cuffs. Close bag with twist tie provided.
3. Push Side-Lock Latch down and tilt drawer side open.
Do not use any kind of bag other than those designed especially
for use in your compactor. Order replacement compactor bags
through your local dealer or by calling the toll-free number on the
cover or in the "Assistance or Service" section.
IMPORTANT:
Before installing a new bag, be sure:
• The drawer side is securely locked.
• The container is clean and free of debris.
1. Place folded bag into the drawer. Open bag and pull top
edges over the drawer top.
2. Lock bag in place by pulling the four prepunched holes over
the bag retainer buttons. Holes will expand over the buttons
without damaging the bag.
3. Press inside of bag against the drawer bottom, sides and
corners for a smooth fit.
11