Table of Contents
Advertisement
Metal marks from aluminum
and copper
•
Cooktop Polishing Creme: Clean as soon as cooktop has
cooled down, Rub creme into surface with a damp paper
towel or soft cloth. Continue rubbing until white film
disappears, The marks will not totally disappear but after
many cleanings become less noticeable,
Tiny scratches
and abrasions
•
Cooktop Polishing Creme: Rub creme into surface with a
damp paper towel or soft cloth. Continue rubbing until white
film disappears. Scratches and abrasions do not affect
cooking performance and after many cleanings become less
noticeable.
COOKTOP
CONTROLS
Do not use steel wool, abrasive cleansers or oven cleaner.
Do not soak knobs.
When replacing knobs, make sure knobs are in the Off position,
On some models, do not remove seals under knobs.
•
Soap and water or dishwasher: Pull knobs straight away from
control panel to remove.
OVEN DOOR EXTERIOR
•
Glass cleaner and paper towels or nonabrasive plastic
scrubbing pad: Apply glass cleaner to soft cloth or sponge,
not directly on panel.
CONTROL
PAN EL
Do not use abrasive cleaners, steel-wool pads, gritty washcloths
or some paper towels. Damage may occur.
•
Glass cleaner and soft cloth or sponge: Apply glass cleaner
to soft cloth or sponge, not directly on panel.
OVEN CAVITY
Do not use oven cleaners.
Food spills should be cleaned when oven cools. At high
temperatures,
foods react with porcelain and staining, etching,
pitting or faint white spots can result.
•
Self-Cleaning cycle: See "Self-Cleaning
Cycle" first.
OVEN RACKS
AND ROASTING
RACKS
•
Self-Cleaning cycle: See "Self-Cleaning
Cycle" first. Remove
racks or they will discolor and become harder to slide. If this
happens, a light coating of vegetable oil applied to the rack
guides will help them slide.
•
Steel-wool
pad
BROILER
PAN AND GRID
Do not clean in the Self-Cleaning
cycle (on some models).
•
Mildly abrasive cleanser: Scrub with wet scouring pad.
•
Solution of 1/2cup (125 mL) ammonia to 1 gal. (3.75 L) water:
Soak for 20 minutes, then scrub with scouring or steel-wool
pad.
•
Oven cleaner: Follow product label instructions.
Porcelain enamel only, not chrome
•
Dishwasher
The oven light is a standard 40-watt appliance bulb. It will come
on when the oven door is open. It will not work during the Self-
Cleaning cycle. On some models when the oven door is closed,
press OVEN LIGHT to turn it on or off.
Before replacing, make sure the oven and cooktop are cool and
the control knobs are in the off position.
To replace:
1. Unplug range or disconnect
power.
2. Turn the glass bulb cover in the back of the oven
counterclockwise
to remove.
3. Turn bulb counterclockwise
to remove from socket.
4. Replace bulb and bulb cover by turning clockwise,
5. Plug in range or reconnect power.
For normal range use, it is not suggested to remove the oven
door. However, if removal is necessary, make sure the oven is off
and cool. Then, follow these instructions. The oven door is heavy.
To Remove:
1. Fully open the oven door.
2. Unscrew clips with a #2 square or Phillips screwdriver.
3. Close oven door to the stop position (open about 4 in.
[10 cm]).
4. Lift door slightly and pull out and back until hinges come out
to the catch position.
5. Push door down and pull straight out to remove door
completely.
\
/-N
17
Advertisement
Table of Contents
