Download Print this page

Whirlpool DU925SCGQ2 Use And Care Manual page 22

Advertisement

Storing
for
the
summer
Protect your dishwasher during the summer
months by turning off the water supply and
power supply to the dishwasher.
Moving
or winterizing
your
dishwasher
Protect your dishwasher and home against
water damage due to freezing water lines. If
your dishwasher is left in a seasonal dwell-
ing or could be exposed to near freezing
temperatures,
have a qualified person do
the following:
1. Disconnect power or unplug dishwasher.
2. Turn off water supply to the dishwasher.
3. Remove the 4 screws on the lower
access panel and remove the lower
access panel.
4. Place a shallow pan under the water
supply valve. Then, use a wrench to
disconnect the water inlet from the water
supply valve. Separate the water inlet
from the water supply valve and drain
water into the pan.
& Remove the spring clamp from the water
outlet and separate from the water
supply valve; drain water into pan.
=
II
L
Reconnect both water inlet and water
outlet to the water supply valve.
Water outlet
Spring
Water pump
clamps
and motor
_ii ¸
__
_
9¸¸¸¸
_
io
valve
inlet
hose
7. Empty the pan and reposition it under
the water pump.
8. Remove the clamp and disconnect the
drain hose from the water pump; drain
water into pan.
9.
Reconnect drain hose to the water
pump, being sure to position the clamp
over the connection.
10. Replace the lower access panel.
NOTE: If your dishwasher is connected to
a garbage disposal, do not run water into
the sink after winterizing. This could cause
water to refill the drain hose on your dish-
washer.
Reconnecting
your
dishwasher
after
storage
1. Remove the 4 screws on the lower
access panel and remove lower
access panel.
2. Turn on the water supply to dishwasher.
3. Reconnect power or plug in dishwasher.
4. Run dishwasher through a complete
cycle and check for leaks.
& Replace lower access panel.
22

Advertisement

loading

This manual is also suitable for:

925 series940 series1000 series