Advertisement
ATTACHING AND REMOVING THE SEAT
Set the bracket on the Seat Frame (36) onto the indF
cated pin on the Front Uptight (42). Attach the Seat
Frame to the Front Upright with the 5/16" x 2 3/4"
Carriage Bolt (14) and the Seat Knob (40).
For some exercises, the Seat (13) must be removed.
First, be sure that the chain is not attached to the leg
lever. Next, remove the Seat Knob (40) and the 5/16"
x 2 3/4" Carriage Bolt (14) from the Seat Frame (36).
Lift the Seat Frame off the Front Upright (42).
ATTACHING THE LEG LEVER TO THE LOW
PULLEY STATION
To use the Leg Lever (29), the seat must be attached
to the front upright (see ATTACHING AND REMOV-
ING THE SEAT above).
Attach one end of the Chain (52) to the Low Cable
(23) with a Cable Clip (53). Attach the other end Of
the Chain to the Eyebolt (35) with a Cable Clip.
I1 b 424o
r .36
13
Pin __,u_
29
< y
WEIGHT RESISTANCE
CHART
This chart shows the approximate weight resistance at each station. "Top" refers to the 6.5 lb. top weight. The
other numbers refer to the 12.5 lb. weight plates. The butterfly arm resistance listed is the resistance for each
butterfly arm
WEIGHT
PLATES
Top
1
2
3
4
5
6
PRESS ARM
BUTTERFLY ARM
LEG LEVER
HIGH PULLEY
LOW PULLEY
(Ibs.)
(lbs.)
(Ibs.)
(lbs.)
(Ibs.)
20
10
15
14
24
45
22
36
28
54
70
33
54
44
82
99
42
75
6O
115
128
48
96
72
147
153
60
115
90
175
184
69
137
103
209
15
Hide quick links:
Advertisement
