Extreme Networks Summit WM3000 Series SW v5.1 Supplementary Manual page 31

Summit WM3000 Series SW v5.1 – Clustering
3. Open a browser and connect to WM3600-2 and confirm the cluster from the other perspective. Open the
Statistics tab, click WM3600-2, then Cluster Peers. WM3600-1 should be a member wireless controller.
4. Establish a console/ssh session with WM3600-1 and WM3600-2. Run the commands "show cluster
members detail" and "show cluster status". Output similar to this will confirm the cluster is in good working order.
31
31
© 2012 Extreme Networks, Inc. All rights reserved.