Extreme Networks Summit WM3000 Series SW v5.1 Supplementary Manual page 28

Summit WM3000 Series SW v5.1 – Clustering
6. Click Copy to transfer the file.
7. Confirm that the file transfer was successful.
8. Reboot WM3600-2
9. Establish a console/ssh session with WM3600-2 and issue the command "
10. Type to confirm the reboot.
y
NOTE
Enter "n" when prompted to save current configuration. The idea is to load
the WM3600-1 configuration to enable the cluster. A "y" here would
overwrite the previous step.
© 2012 Extreme Networks, Inc. All rights reserved.
".
reload
28
28