Table of Contents
Advertisement
Simple Troubleshooting
Simple Troubleshooting
If the display
fails or the performance
dramatically,
check the Display
in accordance
with the
following
instructions.
Remember
to check the peripherals
topinpoint
the source
of the failure.
If the Display
still fails to perform
as expected,
contact the dealer
for assistance.
SYMPTOM
DEALING METHOD
Check the power connection.
NO POWER
Pull the plug out, wait for 60 seconds, then reconnect the power
and open the set
Check the antenna connection.
NO PICTURE
Try other TV channel due to the TV station problem.
Modify the brightness or contrast setting.
Increase the volume.
NO SOUND
Check that if the set is on the mute state or not.
Check the voice setting condition.
Check the voice mode setting condition.
ABNORMAL COLOR
Check the antenna connection
NO RESPONSE OF THE
Check the effect of the batteries, if needed, please replace the
REMOTE CONTROL
batteries or clean the remote sensor window.
The distance between the set and the remote control should be
less than 6 meters.
The SCREEN FLASH IN
The parameter is too big.
VGA MODE
Please use safety mode when restart the PC, and set the
parameter of the monitor according to the instruction.
SOME INTERFERE IN THE
Please modify parameter of the monitor according to the instruction.
VGA MODE
CLEAN THE TV SET
COLOR SPOT
Please pull the plug out when clean the LCD screen. Using soft,
clean cloth to wipe it off. If need to clean further, please use dry
cloth, don't use naphtha or other thinner liquid.
For this product using high definition LCD panel, and this panel
having it is special character, there exist some color spots, so it
normal when the user find few color spots it not a quality problem.
The standard to inspect this panel are all the same which is out of
the scope to replace the product.
20
Advertisement
Table of Contents
