Table of Contents
Advertisement
CONNECTING
A HIGH-DEFINITION
(HD) SOURCE
High-Definition
(HD) Devices with comporlent
video output must
be
connected
to the YUV
input:
Connect the three video outputs (Y, Pb, Pr) from the source to the corresponding
video inputs on
this unit (Component
video cable not included).
Connect the right (red) and left (white) audio output
from the source to the right (red) and left
(white) input on this unit (Audio cable not included).
Make sure you connect both audio and video from the same source to YUV IN.
Note:
Please refer to the user manual
for your
High-Definition
(HD) video source for more
information
and connection
details.
Note : When connecting
a DVD player to the television,
the picture resolution
is solely depen-
dent upon the resolution supported by the DVD player attached. DVD Player resolutions vary from
480i to 1080i, and this television
can support DVD players up
to a maximum
resolution
of 1080i.
HD SOURCE
with component video output
(Digital Cable Box*, Satellite Receiver*,
or external ovePthe-air HD-Tuner)
* May lequire a subscliption
for
_,,c_,iving
HD chann_,ls,
check
with
youl cab]_satellite
p_ovide_
fo_ d_4ails
CONNECTING
AN AUDIO AMPLIFIER
This
connection
allows
you to use an audio
amplifier
and external
speakers.
Connect
the right
(red) and left (white)
audio
OUTPUT
from this unit to the right (red) and left
(white)
audio INPUT
on your amplifier.
Refer to
your amplifier's
user manual for more information.
Note :
1_-_ control the audio, both theTV and the amplifier
must be turned on, and the vol ume of the amplifier
must be set above 0, or you will
not hear any
sound.
If you want to hear the sound from the amplifier
only. Press the Volume - button of TV to decrease
the volume
or press the MUTE button
of remote
control to turn off the sound.
Advertisement
Table of Contents
