Table of Contents
Advertisement
installing the hood
Mounting
the duct cover
= Position the duct cover over the mounted hood.
•
Slide the bottom of the duct into the glass area.
Position the top of the duct over the duct
mounting bracket. If a telescopic duct cover is
used, grab the upper part of the telescopic duct
cover, pull it and place it in the duct cover
mounting bracket.
Secure the top of the duct with 2 assembly
screws provided.
Secure the bottom of the duct with 2 assembly
screws provided.
Instal the grease filter and turn power on at service
panel. Check operation of the hood.
IMPORTANT: If the hood doesn't switch ON, before
calling for service, check if the internalGeneral ON/
OFF Pushb-utton Switch is switched ON.
General ON/OFF
Push button Switch
Frontside of the hood
yi°
Back side of the hood
Advertisement
Table of Contents
