Download Print this page

Electrolux BRT18HP7GC0 Use & Care Manual page 11

Top mount refrigerator

Advertisement

SHELF ADJUSTMENT
Refrigerator shelves are easily adjusted to suit individual
needs. Before adjusting the shelves, remove all food.
To adjust
sliding
shetves:
Remove shelf by pulling forward to stop position.
Lift front edge up and pull out.
Replace the shelf on any pair of rails by reversing this
procedure.
Sliding Glass Shelf
To adjust cantilever
shelves:
Sliding Wire Shelf
edge up.
Lift front
PulI shelf out.
Replace the shelf by inserting the hooks at rear of the shelf into
the walI bracket. Lower the shelf into the desired slots and lock
into position.
SpiflSafe
TM
glass shelves (some models) catch and hold
accidental spills. In some models, the Spfi/Safe
TM
shelves slide
out for easy access to food and for fast cleaning. The shelves
slide out independently
of the cantilever brackets. Just puII the
front of the shelf forward. The shelf can be extended as far as
the stopper wilI allow but it is not removable from the cantilever
bracket.
DOOR STORAGE
Door bins, shelves, and racks are provided for convenient
storage of jars, bottles, and cans. Frequently used items can be
quickly selected.
Some models have door
racks or bins that can
accommodate
ga!Ion-sized
plastic drink containers and
economy-sized
jars and
containers. Some racks are
adjustable for maximum
storage capacity.
The dairy compartment,
which is warmer than the
general food storage section,
is intended for short term
storage of cheese, spreads,
Door Rack
or butter.
ADJUSTABLE DOOR BINS
Some models have adjustable door bins that can be moved to
suit individual
needs.
To move
door
bins
1.
Lift bin straight up.
2.
Remove bin.
3.
Place bin in
desired position.
4.
Lower bin onto
supports until
locked in place.
Adjustable
Door Bin
TALL
BOTTLE
RETAINER
(SOME
MODELS)
The Tall Bottle Retainer keeps tall containers in the bin from
falling forward when opening or closing the refrigerator door.
To install, hold the retainer at the top, and slide it over the
outside wall of the bin, as shown in the diagram. The Tal! Bottle
Retainer works best with a Bin Snugger.
Tall Bottle Retaine_ Ieft_ and Bin Snugger (right)
Full Width Cantilever
Glass Shelf
Cantilever Glass Shelf
Fixed and Sliding
11

Advertisement

loading