Table of Contents
Advertisement
Safety (continued)
SYMBOL
MEANING
• UNLEADED
FUEL
Always use clean, fresh unleaded fuel.
• OIL
Refer to operator's
manual for the proper type of oil.
I
• THROWN
OBJECTS
AND ROTATING
CUTTER
CAN CAUSE
SEVERE
INJURY
WARNING:
Do not operate
without the cutting
attachment
shield in place.
Keep away from the rotating cutting attachment.
• ON/OFF
STOP CONTROL
ON / START / RUN
O
• ON/OFF
STOP CONTROL
OFF OR STOP
• HOT SURFACE
WARNING
Do not touch a hot muffler, gear housing
or cylinder. You may get burned. These parts
get extremely
hot from operation.
When turned off they remain hot for a short time.
• SHARP
BLADE
WARNING:
Sharp blade on cutting attachment
shield. To prevent serious injury, do not
touch line cutting
blade.
• CHOKE
CONTROL
"1 1 c
B • PARTIAL choke position.
C = RUN position.
• BRUSH
CUTTERS
• Replace
dull blade.
Do not sharpen the cutting
blade. Sharpening
the blade can cause the blade tip to
break off while in use. This can result in severe personal injury.
• TRIMMER/BRUSH
CUTTER
SAFETY
WARNING:
Thrown objects
and rotating cutter can cause severe injury. Keep
bystanders,
especially
children
and pets, at least 50 feet (15 m) away from the cutting
area. The cutting attachment
shield must be used when using the trimmer cutting
attach-
ment.
WARNING:
The operation
of any power tool can cause foreign objects
to be thrown
into your eyes. This can lead to severe eye damage.
Before commencing
power tool
operation,
always wear safety glasses or goggles
that are marked as meeting ANSI
Z87.1 standards,
and a full face shield when needed.
7
Advertisement
Table of Contents
