Ide Function Setup - EVGA nForce 750i SLI User Manual

IDE Function Setup

Press
Enter
OnChip IDE Channel0
Primary Master
Primary Slave
Primary Master
Primary Slave
IDE DMA transfer access
Serial-ATA Controller
IDE Prefetch Mode
OnChip IDE Channel0
Use this function to enable
or disable the onchip IDE
Channel0. When disabled,
the Primary Master/Slave
functions are changed to
Auto
changed.
Primary Master/Slave PIO
When
for the primary Master and Slave PIO. Select from
Mode 4
Primary Master/Slave UDMA
When
primary Master and Slave UDMA or set it to
IDE DMA transfer access
Use this function to enable or disable IDE DMA transfer access.
Serial-ATA Controller
This function allows you to enable specific SATA controllers, enable all
controllers, or disable all controllers. The options available are
[SATA-0+1]
IDE Prefetch Mode
Use this function to enable or disable the
40
EVGA
to display the IDE Function Setup menu.
PIO
PIO
UDMA
UDMA
and cannot be
OnChip IDE Channel0
.
OnChip IDE Channel0
,
[Enable All]
[Enabled]
[Auto]
[Auto]
[Auto]
[Auto]
[Enabled]
[All Enabled]
[Enabled]
OnChip IDE Channel0
Primary Master
x
Primary Slave
x
Primary Master
x
Primary Slave
x
IDE DMA transfer access
Serial-ATA Controller
IDE Prefetch Mode
is set to
[Enabled]
Auto
is set to
[Enabled]
[Auto]
, and .
[Disabled]
IDE Prefetch mode
[Disabled]
PIO Auto
PIO Auto
UDMA Auto
UDMA Auto
[Enabled]
[All Enabled]
[Enabled]
, you can select a mode
, or through
Mode 1
, you can disable the
.
,
[SATA-0]
.