Jumper Settings
PCI-E Disable Switches
For the ease of troubleshooting multiple graphics cards or testing an
individual graphics card's overclocking, EVGA has implemented seven
switches you can use to disable individual PCI-E slots. You don't need to
remove any of your graphics cards but simply disable the slot the particular
card is in.
You see the location of the 7 switches in the above diagram. They are
located right above the reset button and BIOS selector. In default shipping
configurations, all slots are enabled with the jumpers in the left position.
From top to bottom, PCI-E slots 1, 2, 3, 4, 5, 6, 7 respectively. To disable a
PCI-E slot move the switch over to the right position.
Do this when the PC is turned off, NOT while it is running!
EVGA Classified SR-X Motherboard
JPE1
JPE2
JPE3
JPE4
JPE5
JPE6
JPE7
27