Filling The Engine With Oil; Installing The Fuse; Charging The Battery - Toro Recycler 20074A Operator's Manual

2. Filling the Engine with Oil
Your mower does not come with oil in the engine, but it
does come with a bottle of oil.
1. Remove the dipstick (Figure 5).
.
G004992
Figure 5
Slowly pour oil into the oil fill tube until the oil level
reaches the Full line on the dipstick (Figure 5). Do not
overfill. (Max. fill: 20 oz., type: SAE 30\V detergent
oil with an API service classification of SF, SG, SH, SJ,
SL, or higher.)
3. Install the dipstick securel3:
Important: Change the engine oil after the first 2
operating hours; change it yearly thereafter. Refer
to Changing the Engine OiL
3. Installing the Fuse
Models 20074 and 20074A only
Your mower comes with a 40-amp fuse that protects the
electric starter.
Important:
You cannot start the mower with the
electric starter or charge the battery unless you install
the fuse.
1. Unclip both ends of the battery cover and remove it
(Figure 6).
.
G005041
Figure 6
Insert the fuse into the fuse holder (Figure 7).
.
G002878
Figure 7
Note: Your mower comes with a fuse in the owner's
packet and another fuse in the battery box.
Install the battery cover.
4. Charging the Battery
Models 20074 and 20074A only
Refer to Charging the Batter?: in the Maintenance section.