Setup; Unfolding The Handle - Toro Recycler 20074A Operator's Manual

Setup
Important:
Remove and discard the protective
plastic sheet that covers the engine.
1. Unfolding the Handle
Folding or unfolding the handle improperly can
damage the cables, causing an unsafe operating
condition.
Do not damage the cables when folding or
unfolding the handle.
If a cable is damaged, contact an Authorized
Service Dealer.
1. Carefully move the upper handle forward until the
handle halves are in line and nest together, and tighten
the handle knobs ( Figure 3).
.
A
G005039
Figure 3
Squeeze the lower handle together and move the handle
rearward until it clicks into the operating position
(Figure 4).
Figure 4
/
\
G005040