Removing The Drawer; Replacing The Drawer - Thermador WD30 Use And Care Manual

Maintenance
Removing the Drawer
WARNING:
To prevent burns, do not remove drawer while hot. Be sure drawer is
empty before removing.
Replacing the Drawer
1. Pull drawer to fully open position.
2. Press down right drawer clip.
3. Lift up left drawer clip.
4. Firmly pull the drawer straight out. Retract cabinet rails while drawer is
removed.
1. Be sure cabinet rails are pushed inside cabinet.
2. Align the drawer rails with the cabinet rails.
3. Firmly push the drawer straight into the cabinet until drawer clicks into place.
4. Open and close drawer to test operation. Note: if the drawer will not close, verify
that the rail clips are properly positioned.
English 10