Advertisement
READ THE INSTRUCTIONS CAREFU LLY BEFORE USING THE OVEN. Forsatisfactory use of your oven, become familiarwith
the various pad functions of the oven as described below.
BROIL PAD--
Used to
select the variable
broil
function.
UP and DOWN ARROW PADS--
Used along
with the function
pads to select oven
temperature,
time of day, clean time and minute
FEATURE INDICATOR
LIGHTS--
These light to show which feature
BAKE PAD--Used
to select the bake
function.
Hi
ii
[:t:l:t:l
PAD--
Used to set or
cancel the minute
timer. The minute timer
does not start or stop
cooking. Also,
TIMER ONIOFF pad is
used to set the
Continuous
Bake
feature.
•
•
•
Oven
• Pro,eat
• Door Locked
J
r_ Controls
• , . Self-Cleaning Oven . , .
/
SELF-CLEAN
PAD--
Used to select the
Self-Cleaning
cycle. A
2 or 3 hour Self-Clean
time may be selected.
OVEN, PREHEAT & DOOR LOCKED LIGHTS* -- The "OVEN"
light
will glow each time the oven turns on to maintain
the set oven
temperature.
The "PREHEAT"
light will glow when the oven is first
set to operate, or if the desired temperature
is reset higher than the
actual oven temperature.
The "DOOR LOCKED"
light will flash
when the oven door locks and unlocks or when using the Self-
Clean cycle or the oven door lockout is activated.
CLEAR/OFF
PAD--
Used
to clear any function
previously
entered
except the time of day
and minute timer. Press
CLEAR/OFF
to stop
cooking. Also the CLEAR/
OFF pad is used to
activate oven door
lockout setting.
*Note: The OVEN indicator light onthe electronic disp!aY Wil! turn ON and OFF when using the Bake feature and during
preheat, This is norma I and indicates that the oven is cycling to maintain the selected baking temperature. When the
preheat indicator light turns OFF, your oven is ready.
Temperature
conversion
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed
for any temperature from 170°F to 550°F (77°C to 287°C).
To change the temperature to °C (Celsius)
or from °C to °F (control
should not be in a Bake or Clean mode):
1.
Press _.
"
"appears in the display.
2.
Press and hold the A
until "HI" appears in the display.
3.
Press and hold _
until °F or °C appears in the display.
4.
Press the A
or V
to change °F to °C or °C to °F.
5.
Press any control pad to return to normal operating mode.
10
Advertisement
