Advertisement
Chat:king the Battery Charge
Using your multimeter, touch the red lead to the positive termina_ of the battew and the black lead to the negative
terminal.
2.
If the voltage level is less than 6.1 VDC, charge the battery.
Rechargi N
the Batt÷W Back-Up
The CommerciaF Series U916 and R916 bikes are both self-powered
(cordless)with
a rechargeable
batteW back-up.
Typically, the bike can be operated without Nugging in the battery charger.
If, however,, the console flickers during
o#eration or the console disNay does not _igN u# while using the machine, then use the battew charger to recharge the
batteW back-up.
The bakery charger is suf_Nied with the unit and plugs into a standard 115 volt, 15 amp outlet, or a 220 volt, 15 amp outlet.
{A[[ maior voltage Nugs are available.}
The Nug-in for the battery charger is located
in the front of the machine at the base.
NOTE: If in.ailing
the optiona_ LCD Monito5 refer to the NV915 installation
manual at
this time.
Plug the wail pack battew charger into the connector
and charge the bakery for
approximatNy
24 hours and then recheck it. it is okay to use the machine while the
battery charger is connected.
When the bike is net connected
to an external power source, the console will power
on as the user starts to pedal machine, and wil_ stay lit for up to 60 seconds in pause
mode. The consNe wil_ power off a_er 60 seconds of stopping exercise.
Bakery
charger plug-in
If the bike is connected to an externa_ power source, the console will power on automatically
and stay on until power is
disconnected.
Advertisement
