Step 5 : Setting The Clock - Sony SLV-D271P Operating Instructions Manual

Step 5 : Setting the clock
Yon must set the clock on the DVD-VCR to use the timer features properly.
Some TV and cable channels transmit time
signals with their broadcasts. Your DVD-
VCR can pick up this time signal to
automatically set the clock.
The Auto Clock Set feature works only if a
channel in your area is broadcasting a time
signal. If broadcasters in your area are not
sending time signals, set the time manually
(page 24).
Before you start...
• Turn on the DVD-VCR and your TV.
When using a cable box, turn it on.
• Set the TV to video input so that the signal
from the player appears on the TV screen.
• Set TV / DVD.VIDEO switch to
DVD.VIDEO on the remote.
• If the DVD player is in play mode, yon
cannot display the setup menu. Stop the
DVD playback.
o®ooi
OOOOi
÷÷®®i
o÷÷i
Q Q®
-- SET UP
t/}/_/_
--ENTER
o_-,,,oqPRETURN
SET UP Press SET UP. then press ,i./,!, to se ect
O (OPTION) and press ENTER.
2
Press 4"/4 to select "Clock Set/Adjust", then
press ENTER.
The "CLOCK SET/ADJUST" menu appears.
CLOCK SET/ADJUST
NIN rg_g_l _ [Ni2N
22 us Setting the clock