Troubleshooting - Sony SLV-D271P Operating Instructions Manual

Troubleshooting
If you have any questions or problems not covered below, please consult your nearest Sony
dealer. (For customers in USA)
General Troubleshooting
Symptom Remedy
Tile I/Q) switch does not fimctinn. • Connect tile AC po'_ er cord securely.
Tile power is turned on but the DVD- • Moislure condensation has occurred. Turn the power off.
VCR does nol operate, unplug the AC power cord and leave tile DVD-VCR In
dry for over three hours.
-_ Tile clock has stopped and " : " • The clock slnps if Ihe DVD-VCR is disconnecled from
o appears in the display window, the wall outlet. Reset the clock/and timer).
O
0a
Tile
renlole conlnlauder does no[
funclion.
• Make sure you are pointing the remote commander at tile
remote sensor on the DVD-VCR.
• Replace all the balteries in the remote commander with
new ones if they are weak.
• Make sure the TV / DVD.VIDEO switch is set correctly.
• Select correctly VIDEO or DVD with the SELECT DVD/
VIDEO button.
Tile tracking meter does not appear • The recording condition of the tape is very poor and
on the screen, tracking cannot be a@lsted.
m,
-I
8"
continued
Troubleshooting 101us