Sony KP-51HW40 Operating Instructions Manual page 23

Installing and Connecting the Projection TV
Connecting a Satellite Receiver
Disconnect all power sources before making any connections.
1 Connect the satellite antenna cable to the satellite receiver's
SATELLITE IN jack.
2 Using AUDI0 and S VIDEO cables, connect the satellite receiver's
AUDIO and S VIDEO OUT jacks to the projection TV's AUDIO and
S VIDEO IN jacks.
3 Connect a coaxial cable from your cable or antenna to the projection
TV's VHF/UHF jack.
Rear of projection TV
Coaxial
cable
3
©
¢3
q_
_3
S
VIDEO
Satellite receiver
IN LI= OUT : Satellite
/ 0_ __} |anteon_
k _ l cable
YC=I 5V/30V {not supplied)
23