Installing The Tv; Preventing The Tv From Toppling Over - Sony BRAVIA KDL-46S3000 Operating Instructions Manual

1. Installing the TV
!
o.
2
1
Screw the support belt (supplied) to the TV
stand with a wood screw (supplied).
2 Attach the support belt to the Table-Top Stand
with the securing screw (supplied) using a
coin, etc.
3 Adjust the length by pulling the support belt
toward you while holding the Table-Top
Stand.
• Be sure to take measures to prevent the TV from
toppling over and causing injury.
• The supplied wood screw may not be used depending
on the type of TV stand. In this case, or when the
securing strength is not enough, use commercial
screws l/s
to 3/1(-,
inch (3 to 4 ram) diameter to fit to the
TV stand. Consult your dealer about the types of
screw(s).
11