Sony BDV-E980 Manual page 54

4
Press ,1%1, to select [Internet Settings],
then press @.
The [Internet Settingsi display appears.
Ir,ternel S _±ti_gs
Im_rnet s_ttL_gsallows youto access c0memoR7o_r home_et_ork
an_th_ In,emit. _l_asesel_c_a choic_h_low.
[ Vi_ NeiworkSt_t_s ]
Wire_Set_n
USBWirelesss_t_n
• The [Internet Settings] items arc necessary to counect
to the Internet. Enter the respective (alphanumeric)
values fl)r your broadband router or Wireless LAN
router. The items that need to be set may differ,
depending on the Internet service provider or the
router. For details, refer to the instruction manuals
that have been provided by your Internet service
provider or supplied with the router.
• For more information, go to the following URL.
For cuslomers in the U.S.:
httl)://www, sony.com/supl)ort
For CUS1OIlleFS iI1 Canada:
English: hltp://www.sony.ca/support
French: http://fr.sony.c a/supl)ort
For customers in Mexico and Latin America:
httl)://esupport .sony.com/L_
Follow the Steps below for connecting to a LAN
(Local Area Network).
Auto setting
1 Press ,1,/4,to select [Wired Setup] on
the [Internet Settings] display, then
press @.
2
3
Press ,1,/4,to select [Auto], then press
®.
The system pert_rms the network setting
automatically, and internet settings appear
on the TV screen.
Press -).
4
5
Press I'/4, to select [Save & Connect],
then press @.
The system starts checking the network
connection.
Check that the message [Internet
Settings is now complete.] appears,
then press @.
The setup is finished. If the message does
not appear, follow the on-screen messages.
Manual setting
1 Press t"/4, to select [Wired Setup] on
the [Internet Settings] display, then
press @.
2 Press '1"14, to select [Custom], then
press @.
3 Press '1"14, t o select the network setting
type, then press @.
• IAutol: The system sets the IP address
automatically, and the [DNS Settingsl
display appears.
When you select [Autol and press @, the
system sets the DNS setting
automatically.
When you select [Specify IP addressl and
press @, enter the DNS settings
manually.
Press (--/'1"/4,/-.)and the number buttons to
set the tMlowing items, then press @.
- [Primary DNS1
- [Secondary DNS1
• [Specify IP addressl: Enter the network
settings manually according to your
network environment.
Press (--/'t"/4,/-.)and the number buttons to
set the following items, then press @.
- tIP Addressl
- [Subnet Maskl
- [Detitult Gatewayl
- [Primary DNS1
- [Secondary DNS1
4
Press I,/4, to select the proxy server
setting, then press @.
• [Nol: A proxy server is not used.
• [Yesl: Enter the proxy server setting.
Press (--/I"/4,/-.) and the number buttons,
then press @.
54us