Embroidering; Before Attaching Embroidery Unit; Attaching Embroidery - Singer futura CE-200 Instruction Manual

3. EMBROiDERiNG
BEFORE ATTACHING EMBROIDERY UNiT
ATTACHING EMBROIDERY FOOT
AU_TIO Always be sure to turn Off PQwe' 10 machine before
c N changing P!e sSe[f°°!i
* Raise presser foot lifteE
* Turn hand wheel toward you until needle is in its highest
position.
1. Remove presser foot screw, presser foot and foot holder.
2. Attach the embroidery presser foot behind presser bar so
that the drive lever is above the needle clamp. Secure it by
tightening presser foot screw.
3. Turn hand wheel toward you to move needle up and down,
and check that the embroidery presser foot moves up and
down together with the needle.
//_ Be Careiul not tO touch the aeedle when
C_N replacing presser foot:
Foot holder
Support du pied
Sujetador prensatelas
Screw
Vis
Guia
Presser foot
Pied de biche zigzag
Pie prensatelas
Presser bar
Barre de pied presseur
Barra de prensatelas
Drive lever
Levier d'entra_nement
Palanca de accionamiento
Needle clamp
Serre-aiguille
Abrazadera de aguja
Embroidery presser foot
Pied presseur de broderie
Prensatelas de bordado
64