Monogramming And Embroidering With Embroidery Hoop - Singer 3820 Instruction Manual

i--I Monogramming and embroidering with embroidery hoop*
Stitch display
Drop the feed dogs (Note: Stitch length cannot be controlled
with dial)
(see item #24 on page #3)
• Set the machine as illustrated:
• Remove the presser foot and the presser foot holder.
• Lower presser foot lever before starting to sew.
• Adjust the stitch width according to the size of lettering or
design.
Preparation for Monogramming and
Embroidering*
• Draw the desired lettering or design on the right side of the
fabric.
• Stretch the fabric between embroidery hoop as firmly as
possible.
• Place the fabric under the needle. Make sure the presser
foot bar is down in its lowest position.
• Turn the handwheel towards you to bring up the lower
thread through the fabric. Sew a few securing stitches at the
starting point.
• Hold the hoop with thumb and forefingers of both hands.
• Coordinate sewing speed and movement of hoop.
Stitch width dial
, or, Oia
(For 3 dial 20 stit_
(For 3 dial 25 stitch model)
i
52
in nil m •
Embroidery hoop not included with machine.