Cube Size Control; Bin Thermostat - Scotsman DCE33 Series User Manual

REPAIR
kWARNING
Electrical Shock Hazard
Disconnect Electrical
Power Before Beginning
Removal of Parts
Cube Size Control
The cube size control controls the timer during the
freeze cycle. If the timer will not start, the cube
size control may be the problem. Removal of the
cube size control requires removal of the ice
storage bin.
1. Unplug or disconnect the electrical power to the
ice machine.
2. Remove the kickplate.
3. Go thru the steps to remove the ice storage bin.
4. Remove screws holding cube size control body
to control box.
5. Remove wires connected to the cube size
control.
6. Carefully pull cube size control and attached
capillary tube from the control box, and follow the
capillary tube to the top of the evaporator.
7. The end of the cube size control is inserted into
a socket attached to the evaporator.
8. Remove the cube size control from the socket
CUBE SIZE CONTROL
REPLA CEMENT
Socket
Pig Tail
DCE33
Bin Thermostat
The bin thermostat is the automatic on-off control
for the ice machine.
1. Unplug or disconnect the electrical power to the
ice machine.
2. Pull the machine out from its installed location.
3. Remove the back panel.
4. Remove the kickplate.
5. Remove the control knob
6.. Remove the control box cover.
7. Remove the screws holding the bin thermostat
to the control box.
Capillary Tube
1
\
\
,\
\
Bin Thermostat
8. Remove the wires attached to the bin
thermostat.
9. Pull the bin thermostat and capillary tube from
the control box, trace the capillary tube to the bin
level control tube and remove the capillary tube
from the tube. Remove the bin thermostat from the
ice machine.
10. Reverse the above steps to replace.
and from the ice machine.
9. Reverse the above steps to replace.
10. Adjust the cube size control per the adjustment
sequence on page 16.
August 1995
Page 23