Sanyo DS27820 Owner's Manual page 9

TV ADJUSTMENT AND SETUP
The on-screen menu provides the viewer with easy access to adjustnaents and settings. Just
use the keys oll the remote control and ibllow the instructions.
HOW TO MAKE ADJUSTMENTS
1. Press MENU key.
2. Use the _/_ keys to highli,q, ht
the desired feature.
3. Use the _/_ keys to choose desired
option (i' indicates selected item).
Items with submenus requires additional steps.
SETTING THE CLOCK
lkV keys - + keys
Clock jManual Auto
Audio jStereo Mono SAP
Picture/Sound jSports Movie
Auto Manual
Initial Channel OFF ON C---
Antenna jCable VHF/UHF
CH. Search jNO Start
ell. Scan Memory C 34 Added
Espanol
Menu Language jEnglish Francais
Press MENU key to exit
_lb use the Auto Clock feature, a local PBS station that is broadcasting an XDS signal must
be received. The Auto Clock searches for the transmitted signal and automatically sets the
clock.
To set the clock automatically:
1. Press MENU
key.
2. Use the _ key to activate
Auto
setting.
Notes:
The clock will be cleared after a power
interruption. When power is restored, the
TV will display the Auto Clock setup
menu on the screen automatically.
]
!
Cable Box and Satellite users must set the clock manually.
To set the clock manually:
1. Press the _ or _ key to select Clock.
2. Press the _ key to choose Manual, if necessary.
3. Press MENU key for adjustments. I Av keys - + keys l
4. Use the _ key to set the hour and the _ key I
I
to set the minutes. ......................................................................................................... i0;3; ....
Quick Tips
[] The menu will disT)lay
on the sereen./_)r
appm.rimaleZv 20
seconds.
Press MENU
again lo rcdisplay.
[] Use the CHANNEL
/ and
VOLUME _/t_! keys
to tmvigat¢ through
the menus at_d to make
selections ._?om Ne
In(_IIHS,
[] @
7b see lhe time
(_/'duy @er selling lhe
ck)ek, press lhe
DISPLAY
k(_v.
[] Lrtendcd Da_a Service
(XDS) signal may no¢
be ¢ransmiHed by all
broadeaslers.
[] Under weak stereo
siLmal conditions, you
may receive better
quality sound in the
"Mono" position.
Needhelp?
VisitourWebsiteat
www.sany0ctv.c0rn
or Call1-800-877-5032
SETTING AUDIO MODE
Select desired sound setting, Stereo, Mono, or SAP (secondary audio progr__trn).
Note: Stereo and SAP must be part of the broadcast signal.
1. Choose Stereo, Mono, or SAP from the Audio options.
2. Press the MENU key to exit.
Note: The TV will automatically reset to stereo
if unplugged or a power interruption occurs.